Smartctl Open Device Dev Sda Failed Dell Or Megaraid Controller Please Try Adding 39d Megaraid N 39 Extra Quality

The error message suggests that the disk drive is behind a RAID controller, which is a hardware component that manages multiple disk drives as a single logical unit. In this case, the controller is a Dell or MegaRAID device. The smartctl utility needs to communicate with the disk drive through this controller, but it doesn't know how to do so by default.

To find the logical drive number, you can use the megacli command, which is a utility provided by LSI (now part of Broadcom) for managing MegaRAID controllers.

megacli -ldinfo -lall This command will display information about all logical drives configured on the MegaRAID controller. Look for the logical drive number associated with the disk drive you want to monitor. The error message suggests that the disk drive

smartctl open device /dev/sda failed: Dell or MegaRAID controller. Please try adding '-d megaraid,N'

To resolve this issue, you need to inform smartctl about the presence of the MegaRAID controller and the logical drive number (N) associated with the disk drive you want to monitor. You can do this by adding the -d megaraid,N option to the smartctl command. To find the logical drive number, you can

Here's an example:

smartctl -d megaraid,0 /dev/sda In this example, 0 is the logical drive number (N) associated with the disk drive /dev/sda . You may need to adjust this value depending on your specific configuration. smartctl open device /dev/sda failed: Dell or MegaRAID

When attempting to run smartctl, a popular command-line utility for monitoring and managing disk drives, on a Linux system, you might encounter an error message similar to: