1-866-427-2547

Battle Royale Vietsub Verified -

Thể loại game Battle Royale được lấy cảm hứng từ bộ phim "Battle Royale" của Nhật Bản, phát hành vào năm 2000. Tuy nhiên, khái niệm này đã được áp dụng vào lĩnh vực game từ năm 2013 với tựa game "Battlegrounds" của studio DayZ. Nhưng phải đến khi PlayerUnknown's Battlegrounds (PUBG) ra mắt vào năm 2017, thể loại game này mới thực sự bùng nổ.

Trong thời gian gần đây, thể loại game sinh tồn Battle Royale đã trở thành một hiện tượng toàn cầu, thu hút hàng triệu người chơi trên khắp thế giới. Và tại Việt Nam, cũng không ngoại lệ, Battle Royale đã tạo nên một cơn sốt game không thể phủ nhận. Trong bài viết này, chúng ta sẽ cùng khám phá về Battle Royale và lý do tại sao nó lại trở nên phổ biến đến vậy.

Battle Royale là một thể loại game sinh tồn, trong đó người chơi sẽ được thả xuống một hòn đảo hoặc một khu vực xác định, với mục tiêu là trở thành người chơi cuối cùng còn sống sót. Người chơi có thể thu thập vũ khí, trang bị và tài nguyên trên bản đồ để tăng cơ hội sinh tồn.

"Chiến Trường Royale - Cơn sốt game sinh tồn đang làm mưa làm gió" battle royale vietsub verified

DeckWise® Ipe Clip® Limited Warranty

In order to be eligible to make a warranty claim, you must complete the registration for warranty here: www.deckwise.com/warranty/register.html

Allows Contraction on the Width of Air-Dried Hardwoods

The method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to contract.

Allows Expansion/Contraction Along the Length of Composite/PVC Decking

Running screws straight down with composite/PVC decking allows these materials to naturally move on their length. Thể loại game Battle Royale được lấy cảm

Decking Compatibility
Board Thickness Board Width
A* = Measurement Of Your Decking B** = Measurement Of Your Decking
Ipe Clip - Extreme Fasteners 3/32" Spacing - GRAY CLIPS - 175 pc. Box for 100 Sq. Ft. of Decking - (Includes 8 x 2" Stainless Steel Screws)
Groove Dimensions
Thickness of Cut Cutting Height Cutting Depth
C = 5/32" (4mm) D*** = (A-5/32")/2 E = 1/2" (13mm)
Board Spacing
During Installation
F**** = 3/32" (2,4mm)

* If using 1-1/2" (38,1mm) or thicker material, you may need to upgrade to a longer screw option than what is typically packaged with the fastening kit.

** For decking 8" (20,32cm) or wider, the (A) dimension should be at least 1-1/2" (38,1mm). Using a wide plank such as this for surface decking will most likely cause cupping issues regardless of how the material is fastened if thicker material is not used.

*** This formula will create a symmetrical profile that allows you to flip and/or rotate the decking to be able to put the best side up. Trong thời gian gần đây, thể loại game

**** Fastener automatically achieves correct gap spacing when boards are pushed tight during installation.

Available Kit Options

Deck Fastener Ipe Clip® Kits may be ordered in differences of 100 count (50 sq. ft.) components and 175 Complete Kit sizes (100 sq. ft.). All deck building screws may also be special ordered with diverse screw lengths, color and style.

Wood Plug Starter Kits

Kits come with 25 wood plugs, and 25 stainless steel #8x2" deck screws.
Sold Seperately

175 Count

  • (175) Ipe Clip® Extreme® Hidden Deck Fasteners
  • (175) #8x2" (4x50mm) Stainless Steel T15 - Star Drive Screws
  • 3/8" Tapered Wood plugs sold seperately
  • (1) 1/8" (3,2mm) High Speed Drill Bit
  • (1) T15 Star Driver Tips
  • (1) Instruction Sheet

100 Count

  • (100) Ipe Clip® Extreme® Hidden Deck Fasteners
  • (100) #8x2" (4x50mm) Colormatch Black Stainless Steel Star Drive Screws
  • (1) Instruction Sheet

2 Gal. Contractor Bucket

  • (525) Hidden Deck Fasteners
  • (525) #8x2" (4x50mm) Stainless Steel T15 - Star Drive Screws
  • (3) T15 Star Driver Tips
  • (3) 1/8" (3,2cm) High Speed Drill Bit
  • (1) Instruction Sheet

5 Gal. Contractor Bucket

  • (1050) Hidden Deck Fasteners
  • (1050) #8x2" (4x50mm) Stainless Steel T15 - Star Drive Screws
  • (5) T15 Star Driver Tips
  • (5) 1/8" High Speed Drill Bit
  • (1) Instruction Sheet

EXTREME® Ipe Clip® Series - U.S. Patent Numbers 8,464,488 and 8,806,829.
Original, “round”, STANDARD Ipe Clip® - U.S. Patent No. D470,039.

EXTREMEKD® and EXTREME4® Licensed under U.S. Patent Nos. 7,874,113 and 8,161,702 Patent.

Everything you need to get the job done!

Extreme® Deck Fasteners
Stainless Steel Screws
T15 Star Drive Tip
1/8" Drill Bit
3/8" Tapered Ipe Plugs - SOLD SEPERATELY
This site uses cookies to help better your experience. By using DeckWise® you agree to our new privacy policy, cookie policy, & terms, which we encourage you to review.
accept

Shop Our
Nearby Dealers

Use our dealer locator to find DeckWise® building products locally near you!

Sign Up for our Newsletter